This website uses cookies to analyze the traffic. Information on the use of our website is therefore transferred to Google. More information

Accept

On the 18th of March we have implemented the new warehouse management system that will improve anyseals efficiency and service quality to you. Although we have some delays with shipping out the goods, we do see already improvements in our warehouse. We are fully committed to rectify these delays as quickly as possible and remain at your service.

Contact
Products / Shop Tutorials Compounds Applications Overview O-rings with food approvals Drinking water, food and pharmaceutical industries Profile rings WR-15 acc. DIN 3869 Standard Shaft Seals FKM Shaft Seals Pressure resistant Oil Seal OS-PA31 V-Rings X-Rings evolast® FFKM High performance FKM Petrochemical Applications Shaft Repair Sleeves Company Quality assurance News Downloads Contact Imprint Privacy Policy
Shop

The PTFE oil seals OS-PA31 are used in the sealing of rotating shafts at high speeds, high pressures and extreme temperatures.

The OS-PA31 is a pressure-resistant oil seal with a metal outer jacket. The seal consists of a sealing lip made of filled PTFE, a housing of stainless a steel and a static sealing washer made of FKM.


OS-PA31 PTFE seals are used in the sealing of rotating shafts at high speeds, high pressures and extreme temperatures. Oil seals typically do not perform well under these conditions as their seal lips are made of elastomer materials.

The application range of OS-PA31 in general engineering and chemical industry is very broad, for example: mixers, centrifuges, pumps, fans, rotating unions. They are also frequently used, in special combinations of compounds, in food and pharmaceutical applications.

Special features

  • Permits high shaft speeds
  • High thermal resistance de -90°C à +250°C
  • High chemical resistance
  • Pressure loadable up to 1MPa (10bar, 145psi) depending on the other parameters
  • Applicable with insufficient lubrication and dry running
  • Very low friction coefficient, stick-slip free running
  • Size of inner diameter possible from 5mm
  • Over 300 sizes available from stock
  • Non-moulded processing
  • Small runs without mould cost possible
  • Short delivery time
  • Very firm and exact fit inside the housing due to metal-metal interference fit
  • Please note: possible limited static tightness at the outer diameter with gaseous or low-viscosity media, use sealing aids at the outer diameter if necessary. The dynamic sealing behavior may be limited compared to elastomer RWDR.

Download our technical information as PDF

Oil Seals OS-PA31